Norstar Admin. Programming

Norstar Admin. Programming

Programming must be done from any M7310, T7316, or M7324 model phone set.

To Log Into System Programming:
1. Press FEATURE * * 2 6 6 3 4 4
2. Enter Password: 2 6 6 3 4 4       Display will read: ” A. Configuration”
Using the navigation keys, as displayed below, follow the next simple steps:
3. Press: NEXT        Display will read: “B. General Admin”
4. Press: SHOW       Display will read: “1. Sys speed dial”
5. Press: NEXT         Display will read: “2. Names”
6. Press: NEXT         Display will read: “3. Time and date”
7. Press: SHOW        Display will read: “Time # # : # #” (Your current setting.

To Change the Time:
1. Press the CHANGE softkey     Display will read: “Hour:
2. Press the CHANGE softkey         Display will read: “Hour: _ ”
3. Enter the new HOUR. (in 24-hour format – Ex.: 5:00pm = 17:00.     Display will then read the new Hour programmed.
4. Press NEXT     Display will read: “Minutes: # # ”
5. Press the CHANGE softkey       Display will read: “Minutes”: _ ”
6. Enter the new MINUTES.

To Change the Date:
1. Press NEXT      Display will read: “Date DD MM YY”
2. Press the CHANGE softkey     Display will read: “Year: # # ”
3. Press the CHANGE softkey, (If the year is incorrect)     Display will read: “Year: _ ”
4. Enter the new YEAR        Display will then read the new Year programmed.
5. Press NEXT       Display will read: “Month: # # ”
6. Press the CHANGE softkey, (If the month is incorrect)      Display will read: “Month: _ ”
7. Enter the new MONTH      Display will then read the new Month programmed
8. Press NEXT     Display will read: “Month: # # ”
9. Press the CHANGE softkey, (If the day is incorrect)     Display will read: “Day: _ ”
10. Enter the new DAY     Display will then read the new Day programmed

Programming System Speed Dials

Follow steps 1-3 under “Log Into System Features”

4. Press: SHOW    Display will read: “1. Sys speed dial”
5. Press: SHOW     Display will read: “Speed Dial #:___”  HINT: Begin your system Speed Dials with “01″
6. Enter: 01 or 02 or 03 etc…      Display will read: “Speed dial #:01″
7. Press: SHOW     Display will read: “No number stored”
8. Press the “CHANGE” softkey.     Display will read: “#01:
9. Enter the Speed Dial number
10. Press the “OK” softkey.
11. Press: NEXT     Display will read: “Use prime line”
12. Press: NEXT     Display will read: “Display digits:Y”
13. Press: NEXT     Display will read: “Bypass restr’n:N”
14. Press: NEXT     Speed dial 01 has now been programmed:

To program another Speed Dial Number, repeat steps 6 thru 14.

Changing a name on a phone
Follow steps 1-3 under “Log Into System Features”
4. Press: SHOW     Display will read: “1. Sys speed dial”
5. Press: NEXT      Display will read: “2. Names”
6. Press the SHOW     Display will read: “Set names”
7. Press: SHOW     Display will read: “Show set:__”
8. Enter the extension number of which you wish to change the name     Display will read: “<##:name>”
9. Press the CHANGE softkey
10. Using the dial pad spell out the name    Ex: If you need the letter K press the 5 key twice and then press # to confirm the letter. Continue until the entire first name is spelled. (note: you are limited to 7 characters)
11. Press: NEXT (if you fail to do this step, the name will not be saved!!!)
12. Press the RLS key